106 research outputs found

    FOOT-MOVEMENT, LOAD AND INJURY IN VOLLEYBALL

    Get PDF
    Many human movements are very typical to one sporting activity. Such movements may be a particular way of hittiny a ball (whole body movement) or placing the foot on the ground (one segment movement). Movements are the result of acting forces and as a consequence lead to a loading of joints, tendons and other anatanical structures. Load on the other hand is recognized as a critical factor regarding the occurence of pain and injury (Nigg, Stuessi). So movement, load and injury are related to each other. In running this relation has been pursued for a number of years, in other sports, i.e. volleyball it is almost unknown. The goal of this presentation is twofold: (1) To present a structuring of the game of volleyball in order (2) to establish a relationship between foot-movement, injury and load. Applications are presented using selected examples

    Gait analysis in patients with idiopathic scoliosis

    Get PDF
    Introduction: The goal of this study was to observe scoliotic subjects during level walking to identify asymmetries—which may be related to a neurological dysfunction or the spinal deformity itself—and to correlate these to the severity of the scoliotic curve. Methods: We assessed the gait pattern of ten females (median age 14.4) with idiopathic scoliosis characterised by a left-lumbar and a right-thoracic curve component. Gait analysis consisted of 3D kinematic (VICON) and kinetic (Kistler force plates) measurements. The 3D-segment positions of the head, trunk and pelvis, as well as the individual joint angles of the upper and lower extremities, were computed during walking and static standing. Calculation of pertinent kinetic and kinematic parameters allowed statistical comparison. Results: All subjects walked at a normal velocity (median: 1.22m/s; range:1.08-1.30m/s; height-adjusted velocity: 0.75m/s; range: 0.62-0.88m/s). The timing of the individual gait phases was normal and symmetrical for the whole group. Sagittal plane hip, knee and ankle motion followed a physiological pattern. Significant asymmetry was observed in the trunk's rotational behaviour in the transverse plane. During gait, the pelvis and the head rotated symmetrically to the line of progression, whereas trunk rotation was asymmetric, with increased relative forward rotation of the right upper body in relation to the pelvis. This produced a torsional offset to the line of progression. Minimal torsion (at right heel strike) measured: median 1.0° (range: 5.1°-8.3°), and maximal torsion (at left heel strike) measured 11.4° (range 6.9°-17.9°). The magnitude of the torsional offset during gait correlated to the severity of the thoracic deformity and to the standing posture, whereas the range of the rotational movement was not affected by the severity of the deformity. The ground reaction forces revealed a significant asymmetry of [Msz], the free rotational moment around the vertical axis going through the point of equivalent force application. On the right side, the initial endo-rotational moment was lower, followed by a higher exo-rotational moment than on the left. All the other force parameters (vertical, medio-lateral, anterior-posterior), did not show a significant side difference for the whole group. The use of a brace stiffened torsional motion. However the torsional offset and the asymmetry of the free rotational moment remained unchanged. Conclusion: The most significant and marked asymmetry was seen in the transverse plane, denoted as a torsional offset of the upper trunk in relation to the symmetrically rotating pelvis. This motion pattern was reflected by a ground-reaction-force asymmetry of the free rotational moment. Further studies are needed to investigate whether this behaviour is solely an expression of the structural deformity or whether it could enhance the progression of the torsional deformit

    COMPARISON OF ANGLES AND THE CORRESPONDING MOMENTS IN KNEE AND HIP DURING RESTRICTED AND UNRESTRICTED SQUATS

    Get PDF
    The aim of this study is the comparison of angles and the corresponding moments in knee and hip during squatting. The five subjects performed restricted and unrestricted squats. The experimental set-up consisted of a motion capture system and two force plates. The loading conditions were 0, ¼ and ½ BW. The moments and the force were calculated using inverse dynamics. Overall, the maximal moments were observed in the knee during unrestricted squats and in the hip during restricted squats. Comparing the moments at a knee angle of 60º, the loading conditions have a larger influence than the type of execution. The moment in the knee is 10.4%, respectively 11.2% lower with ¼ and ½ body weight during restricted squats. In the hip, the moment is 15.5 %, respectively 14 % higher for the same conditions. The angle of the hip remains rather constant. This most likely implies a higher load to the lower back. Hence, the exercise instruction should be adapted to the aims and the training condition of the athlete

    Effects of Foot Orthoses on Skeletal Motion During Running

    Get PDF
    Objective. To quantify the effects of medial foot orthoses on skeletal movements of the calcaneus and tibia during the stance phase in running. Design. Kinematic effects of medial foot orthoses (anterior, posterior, no support) were tested using skeletal (and shoe) markers at the calcaneus and tibia. Background. Previous studies using shoe and skin markers concluded that medially placed orthoses control/reduce foot eversion and tibial rotation. However, it is currently unknown if such orthoses also affect skeletal motion at the lower extremities. Methods. Intracortical Hofman pins with reflective marker triads were inserted under standard local anesthetic into the calcaneus and tibia of five healthy male subjects. The three-dimensional tibiocalcaneal rotations were determined using a joint coordinate system approach. Eversion (skeletal and shoe) and tibial rotation were calculated to study the foot orthoses effects. Results. Orthotic effects on eversion and tibial rotations were found to be small and unsystematic over all subjects. Differences between the subjects were significantly larger (pp\u3c0.05). Conclusions. This in vivo study showed that medially placed foot orthoses did not change tibiocalcaneal movement patterns substantially during the stance phase of running. Relevance Orthoses may have only small kinematic effects on the calcaneus and tibia (measured with bone pins) as well as on the shoes (measured with shoe markers) during running of normal subjects. Present results showed that orthotic effects were subject specific and unsystematic across conditions. It is speculated that orthotic effects during the stance phase of running may be mechanical as well as proprioceptive

    Lessons from dynamic cadaver and invasive bone pin studies: do we know how the foot really moves during gait?

    Get PDF
    Background: This paper provides a summary of a Keynote lecture delivered at the 2009 Australasian Podiatry Conference. The aim of the paper is to review recent research that has adopted dynamic cadaver and invasive kinematics research approaches to better understand foot and ankle kinematics during gait. It is not intended to systematically cover all literature related to foot and ankle kinematics (such as research using surface mounted markers). Since the paper is based on a keynote presentation its focuses on the authors own experiences and work in the main, drawing on the work of others where appropriate Methods: Two approaches to the problem of accessing and measuring the kinematics of individual anatomical structures in the foot have been taken, (i) static and dynamic cadaver models, and (ii) invasive in-vivo research. Cadaver models offer the advantage that there is complete access to all the tissues of the foot, but the cadaver must be manipulated and loaded in a manner which replicates how the foot would have performed when in-vivo. The key value of invasive in-vivo foot kinematics research is the validity of the description of foot kinematics, but the key difficulty is how generalisable this data is to the wider population. Results: Through these techniques a great deal has been learnt. We better understand the valuable contribution mid and forefoot joints make to foot biomechanics, and how the ankle and subtalar joints can have almost comparable roles. Variation between people in foot kinematics is high and normal. This includes variation in how specific joints move and how combinations of joints move. The foot continues to demonstrate its flexibility in enabling us to get from A to B via a large number of different kinematic solutions. Conclusion: Rather than continue to apply a poorly founded model of foot type whose basis is to make all feet meet criteria for the mechanical 'ideal' or 'normal' foot, we should embrace variation between feet and identify it as an opportunity to develop patient-specific clinical models of foot function

    Cushioning and lateral stability functions of cloth sport shoes

    Get PDF
    This is an Accepted Manuscript of an article published by Taylor & Francis in Sports Biomechanics on 28/08/2007, available online: http://dx.doi.org/10.1080/14763140701491476.In this study, we evaluated the protective functions of cloth sport shoes, including cushioning and lateral stability. Twelve male students participated in the study (mean ± s: age 12.7 ± 0.4 years, mass 40.7 ± 0;5.9 kg, height 1.50 ± 0.04 m). Cloth sport shoes, running shoes, basketball shoes, cross-training shoes, and barefoot conditions were investigated in random sequence. Human pendulum and cutting movement tests were used to assess cushioning performance and lateral stability, respectively. For cushioning, the running shoes (2.06 body weight, BW) performed the best, while the cross-training shoes (2.30 BW) and the basketball shoes (2.37 BW) both performed better than the cloth sport shoes (2.55 BW) and going barefoot (2.63 BW). For the lateral stability test, range of inversion-eversion was found to be from 3.6 to 4.9°, which was far less than that for adult participants (<20°). No significant differences were found between conditions. All conditions showed prolonged durations from foot-strike to maximum inversion (66-95 ms), which was less vigorous than that for adult participants (>40 ms) and was unlikely to evoke intrinsic stability failure. In conclusion, the cloth sport shoe showed inferior cushioning capability but the same lateral stability as the other sports shoes for children

    Changes in multi-segment foot biomechanics with a heat-mouldable semi-custom foot orthotic device

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Semi-custom foot orthoses (SCO) are thought to be a cost-effective alternative to custom-made devices. However, previous biomechanical research involving either custom or SCO has only focused on rearfoot biomechanics. The purpose of this study was therefore to determine changes in multi-segment foot biomechanics during shod walking with and without an SCO. We chose to investigate an SCO device that incorporates a heat-moulding process, to further understand if the moulding process would significantly alter rearfoot, midfoot, or shank kinematics as compared to a no-orthotic condition. We hypothesized the SCO, whether moulded or non-moulded, would reduce peak rearfoot eversion, tibial internal rotation, arch deformation, and plantar fascia strain as compared to the no-orthoses condition.</p> <p>Methods</p> <p>Twenty participants had retroreflective markers placed on the right limb to represent forefoot, midfoot, rearfoot and shank segments. 3D kinematics were recorded using an 8-camera motion capture system while participants walked on a treadmill.</p> <p>Results</p> <p>Plantar fascia strain was reduced by 34% when participants walked in either the moulded or non-moulded SCO condition compared to no-orthoses. However, there were no significant differences in peak rearfoot eversion, tibial internal rotation, or medial longitudinal arch angles between any conditions.</p> <p>Conclusions</p> <p>A semi-custom moulded orthotic does not control rearfoot, shank, or arch deformation but does, however, reduce plantar fascia strain compared to walking without an orthoses. Heat-moulding the orthotic device does not have a measurable effect on any biomechanical variables compared to the non-moulded condition. These data may, in part, help explain the clinical efficacy of orthotic devices.</p

    Efficacy of customised foot orthoses in the treatment of achilles tendinopathy : study protocol for a randomised trial

    Get PDF
    BACKGROUND: Achilles tendinopathy is a common condition that can cause marked pain and disability. Numerous non-surgical treatments have been proposed for the treatment of this condition, but many of these treatments have a poor or non-existent evidence base. The exception to this is eccentric calf muscle exercises, which have become a standard non-surgical intervention for Achilles tendinopathy. Foot orthoses have also been advocated as a treatment for Achilles tendinopathy, but the long-term efficacy of foot orthoses for this condition is unknown. This manuscript describes the design of a randomised trial to evaluate the efficacy of customised foot orthoses to reduce pain and improve function in people with Achilles tendinopathy. METHODS: One hundred and forty community-dwelling men and women aged 18 to 55 years with Achilles tendinopathy (who satisfy inclusion and exclusion criteria) will be recruited. Participants will be randomised, using a computer-generated random number sequence, to either a control group (sham foot orthoses made from compressible ethylene vinyl acetate foam) or an experimental group (customised foot orthoses made from semi-rigid polypropylene). Both groups will be prescribed a calf muscle eccentric exercise program, however, the primary difference between the groups will be that the experimental group receive customised foot orthoses, while the control group receive sham foot orthoses. The participants will be instructed to perform eccentric exercises 2 times per day, 7 days per week, for 12 weeks. The primary outcome measure will be the total score of the Victorian Institute of Sport Assessment - Achilles (VISA-A) questionnaire. The secondary outcome measures will be participant perception of treatment effect, comfort of the foot orthoses, use of co-interventions, frequency and severity of adverse events, level of physical activity and health-related quality of life (assessed using the Short-Form-36 questionnaire - Version two). Data will be collected at baseline, then at 1, 3, 6 and 12 months. Data will be analysed using the intention to treat principle. DISCUSSION: This study is the first randomised trial to evaluate the long-term efficacy of customised foot orthoses for the treatment of Achilles tendinopathy. The study has been pragmatically designed to ensure that the study findings are generalisable to clinical practice. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry Number: ACTRN12609000829213
    corecore